Yurdle_ynh/scripts/install

#!/bin/bash

#=================================================
# GENERIC START
#=================================================
# IMPORT GENERIC HELPERS
#=================================================

source _common.sh
source /usr/share/yunohost/helpers

# Install parameters are automatically saved as settings
#
# Settings are automatically loaded as bash variables
# in every app script context, therefore typically these will exist:
# - $domain
# - $path
# - $language
# ... etc
#
# Resources defined in the manifest are provisioned prior to this script
# and corresponding settings are also available, such as:
# - $install_dir
# - $port
# - $db_name
# ...

#
# $app is the app id (i.e. 'example' for first install,
# or 'example__2', '__3', ... for multi-instance installs)
#

#=================================================
# APP "BUILD" (DEPLOYING SOURCES, VENV, COMPILING ETC)
#=================================================
# DOWNLOAD, CHECK AND UNPACK SOURCE
#=================================================
ynh_script_progression --message="Setting up source files..." --weight=1

### `ynh_setup_source` is used to install an app from a zip or tar.gz file,
### downloaded from an upstream source, like a git repository.
### `ynh_setup_source` use the file manifest.toml

# Download, check integrity, uncompress and patch the source from manifest.toml
ynh_setup_source --dest_dir="$install_dir"

# $install_dir will automatically be initialized with some decent
# permission by default ... however, you may need to recursively reapply
# ownership to all files such as after the ynh_setup_source step
chown -R $app:www-data "$install_dir"

#=================================================
# SYSTEM CONFIGURATION
#=================================================
ynh_script_progression --message="Adding system configurations related to $app..." --weight=1

### `ynh_add_fpm_config` is used to set up a PHP config.
### You can remove it if your app doesn't use PHP.
### `ynh_add_fpm_config` will use the files conf/php-fpm.conf
### If you're not using these lines:
###		- You can remove these files in conf/.
###		- Remove the section "BACKUP THE PHP-FPM CONFIGURATION" in the backup script
###		- Remove also the section "REMOVE PHP-FPM CONFIGURATION" in the remove script
###		- As well as the section "RESTORE THE PHP-FPM CONFIGURATION" in the restore script
###		  with the reload at the end of the script.
###		- And the section "PHP-FPM CONFIGURATION" in the upgrade script

# Create a dedicated PHP-FPM config using the conf/php-fpm.conf or conf/extra_php-fpm.conf
ynh_add_fpm_config

# Create a dedicated NGINX config using the conf/nginx.conf template
ynh_add_nginx_config

### `ynh_systemd_config` is used to configure a systemd script for an app.
### It can be used for apps that use sysvinit (with adaptation) or systemd.
### Have a look at the app to be sure this app needs a systemd script.
### `ynh_systemd_config` will use the file conf/systemd.service
### If you're not using these lines:
###		- You can remove those files in conf/.
###		- Remove the section "BACKUP SYSTEMD" in the backup script
###		- Remove also the section "STOP AND REMOVE SERVICE" in the remove script
###		- As well as the section "RESTORE SYSTEMD" in the restore script
###		- And the section "SETUP SYSTEMD" in the upgrade script

# Create a dedicated systemd config
ynh_add_systemd_config

### `yunohost service add` integrates a service in YunoHost. It then gets
### displayed in the admin interface and through the others `yunohost service` commands.
### (N.B.: this line only makes sense if the app adds a service to the system!)
### If you're not using these lines:
###		- You can remove these files in conf/.
###		- Remove the section "REMOVE SERVICE INTEGRATION IN YUNOHOST" in the remove script
###		- As well as the section "INTEGRATE SERVICE IN YUNOHOST" in the restore script
###		- And the section "INTEGRATE SERVICE IN YUNOHOST" in the upgrade script

yunohost service add $app --description="A short description of the app" --log="/var/log/$app/$app.log"

### Additional options starting with 3.8:
###
### --needs_exposed_ports "$port" a list of ports that needs to be publicly exposed
###                               which will then be checked by YunoHost's diagnosis system
###                               (N.B. DO NOT USE THIS if the port is only internal!!!)
###
### --test_status "some command"  a custom command to check the status of the service
###                               (only relevant if 'systemctl status' doesn't do a good job)
###
### --test_conf "some command"    some command similar to "nginx -t" that validates the conf of the service
###
### Re-calling 'yunohost service add' during the upgrade script is the right way
### to proceed if you later realize that you need to enable some flags that
### weren't enabled on old installs (be careful it'll override the existing
### service though so you should re-provide all relevant flags when doing so)

### `ynh_use_logrotate` is used to configure a logrotate configuration for the logs of this app.
### Use this helper only if there is effectively a log file for this app.
### If you're not using this helper:
###		- Remove the section "BACKUP LOGROTATE" in the backup script
###		- Remove also the section "REMOVE LOGROTATE CONFIGURATION" in the remove script
###		- As well as the section "RESTORE THE LOGROTATE CONFIGURATION" in the restore script
###		- And the section "SETUP LOGROTATE" in the upgrade script

# Use logrotate to manage application logfile(s)
ynh_use_logrotate

# Create a dedicated Fail2Ban config
# ynh_add_fail2ban_config --logpath="/var/log/nginx/${domain}-error.log" --failregex="Regex to match into the log for a failed login" -t

#=================================================
# APP INITIAL CONFIGURATION
#=================================================
# ADD A CONFIGURATION
#=================================================
ynh_script_progression --message="Adding a configuration file..." --weight=1

### You can add specific configuration files.
###
### Typically, put your template conf file in ../conf/your_config_file
### The template may contain strings such as __FOO__ or __FOO_BAR__,
### which will automatically be replaced by the values of $foo and $foo_bar
###
### ynh_add_config will also keep track of the config file's checksum,
### which later during upgrade may allow to automatically backup the config file
### if it's found that the file was manually modified
###
### Check the documentation of `ynh_add_config` for more info.

ynh_add_config --template="../conf/config.php" --destination="$install_dir/config.php"

# FIXME: this should be handled by the core in the future
# You may need to use chmod 600 instead of 400,
# for example if the app is expected to be able to modify its own config
chmod 400 "$install_dir/config.php"
chown $app:$app "$install_dir/config.php"

chmod -R 700 "$install_dir/src/"
chown -R $app:$app "$install_dir/src/"

php -r "require '/var/www/$app/src/server.php'; updateRemoteData(); "
chown $app:$app "$install_dir/data.toml"
chmod 700 "$install_dir/data.toml"
echo "*/10 * * * * yurdle /usr/bin/php8.2 -r \"require '/var/www/$app/src/server.php'; updateRemoteData(); \"" >>"/etc/cron.d/$app"

php -r "require '/var/www/$app/src/server.php'; chooseTodayPerson(); "
chown $app:$app "$install_dir/src/todays.php"
chmod 700 "$install_dir/src/todays.php"
echo "0 0 * * * yurdle /usr/bin/php8.2 -r \"require '/var/www/$app/src/server.php'; chooseTodayPerson(); \"" >>"/etc/cron.d/$app"

chmod 700 "/etc/cron.d/$app"
systemctl restart cron.service

### For more complex cases where you want to replace stuff using regexes,
### you shoud rely on ynh_replace_string (which is basically a wrapper for sed)
### When doing so, you also need to manually call ynh_store_file_checksum
###
### ynh_replace_string --match_string="match_string" --replace_string="replace_string" --target_file="$install_dir/some_config_file"
### ynh_store_file_checksum --file="$install_dir/some_config_file"

#=================================================
# SETUP APPLICATION WITH CURL
#=================================================

### Use these lines only if the app installation needs to be finalized through
### web forms. We generally don't want to ask the final user,
### so we're going to use curl to automatically fill the fields and submit the
### forms.

# Installation with curl
ynh_script_progression --message="Finalizing installation..." --weight=1
ynh_local_curl "/INSTALL_PATH" "key1=value1" "key2=value2" "key3=value3"

#=================================================
# GENERIC FINALIZATION
#=================================================
# START SYSTEMD SERVICE
#=================================================
# ynh_script_progression --message="Starting a systemd service..." --weight=1

### `ynh_systemd_action` is used to start a systemd service for an app.
### Only needed if you have configure a systemd service
### If you're not using these lines:
###		- Remove the section "STOP SYSTEMD SERVICE" and "START SYSTEMD SERVICE" in the backup script
###		- As well as the section "START SYSTEMD SERVICE" in the restore script
###		- As well as the section"STOP SYSTEMD SERVICE" and "START SYSTEMD SERVICE" in the upgrade script
###		- And the section "STOP SYSTEMD SERVICE" and "START SYSTEMD SERVICE" in the change_url script

# Start a systemd service
# ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$app/$app.log"

#=================================================
# END OF SCRIPT
#=================================================
ynh_script_progression --message="Installation of $app completed" --last